You also want to use a drill for this process as the mechsnism on an impact driver doesn’t deliver a smooth action. Don’t ruin the whole thing by rushing the process. If you’re stopping to remove a screw, then there’s some value in protecting your workpiece. Depending on the size of the screw extractor you plan to use, you probably only need to drill down about 1/8″ to 1/4″. Keeping your drill bit straight, drill down slowly into the screw. To make your life easier, add a little bit of thread cutting oil to the head of the screw. Next, find a drill bit that has a smaller diameter than the screw you need to remove. Pro Tip: If you’re working a bolt or plug out of an engine, mind those metal shards – you don’t want them falling into the engine block! Step 4: Drilling a Guide Hole If that’s the set you have, skip the punching and drilling step. Some screw extractors have a burnishing end that you can use to drill out the screw head directly. With a basic screw extractor, you may need to provide some space in the screw head for it to work. That means drilling or expanding a hole in that old screw. You may also want a pair of gloves if you’re concerned about metal shavings cutting you. You always want to protect your eyeballs from debris.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |